| AC/DC power supply | Voltage: rated AC100V ~ AC240V (root mean square value), tolerance
-15% ~ +10% (85VAC ~ 264VAC)
Frequency: rated 50Hz or 60Hz, tolerance-6%~+4%(47Hz~63Hz) |
| Power supply on Site | 24V DC (-15% ~ +20%) |
| System Power Supply | 24V DC (-15% ~ +20%) |
| Working Environment Temperature | 0℃～60℃, EN60068-2-14, Test Nb |
| Storage Environment Temperature | -40 ℃ ~ +70 ℃, EN60068-2-14, Test Na |
| Humidity | 5%～95%, no condensation, EN60068-2-30, Test Db |
| Working Altitude | ≤2000m |
| Storage Altitude | ≤3000m |
| Electrical Safety | Meet the requirement of IEC 61131-2, IEC 61010-1, IEC 61010-2-201.
Enclosed, SELV/PELV circuits. |
| Isolation withstand voltage (field to system) | 500V ACt1mistn,leakage current is not more than 5mA |
| Over voltage level | II |
| IP protection grade | IEC60529 IP20(the foreign matter more than 12mm can not enter,not
waterproof) |
| Pollution Level | 2 |
| Vibration | Sinusoidal vibration (durability) | 0.5G @ 10 to 150Hz, 3 axis, 20 times per axis, IEC 60068-2-6 |
| Sinusoidal vibration (operation) | 3.5mm @ 5 to 8.4Hz, 3 axis, 10 times per axis, IEC 60068-2-6 |
| 1G @ 8.4 to 150Hz, 3 axis, 10 times per axis, IEC 60068-2-6 |
| shock | Half sinusoidal, 15G peak for 11ms, 3 axis, 18 times in total, IEC
60068-2-27 |
| collision | (0.5±0.04)J, 3 times per spot |
| EMC | Radiation emission | IEC 61131-2, EN 61000-6-4, EN 50121-4 |
| Conducted emission | IEC 61131-2, EN 61000-6-4, EN 50121-4 |
| Electrostatic discharge | IEC 61000-4-2 Contact discharge ±6 kV, Air discharge ±8 kV. |
| Radio frequency electromagnetic field radiation immunity | IEC61000-4-3
80MHz~1000MHz, 20V/m
1.4GHz~2.0GHz, 10V/m
2.0GHz~6GHz, 5V/m
80 % AM (1 kHz) |
| Power frequency magnetic field immunity | IEC 61000-4-8 100 A/m (50 Hz) |
| Electrical fast transient burst | AC power port:
2kV (5/50 ns, 5 kHz and 100 kHz)
4kV (5/50 ns, 5 kHz and 100 kHz) |
Signal port:
2kV (5/50 ns, 5 kHz and 100 kHz)
2kV (5/50 ns, 5 kHz and 100 kHz), DIO with shielded lines |
| surge | AC power port:
2kV CM, 1kV DM
4kV CM, 2kV DM |
Signal port:
2kV CM |
| RF conducted immunity | IEC61000-4-6
20V, 150 kHz to 80 MHz
80%AM(1kHz) |
| 0Hz~150kHz Common mode conduction immunity | AC power port:
1 V to 10 V increasing with 20 dB/decade (1,5 kHz to 15 kHz).
10 V (15 kHz to 150 kHz) |
Signal port:
1 V to 10 V increasing with 20 dB/decade (1,5 kHz to 15 kHz);
10 V (15 kHz to 150 kHz)
10 V (continuous: DC, 16 2/3 Hz, 50 Hz, 150 Hz)
100 V (short duration 1 s: DC, 16 2/3 Hz, 50 Hz) |
| Voltage dips, short interruptions | 0 % during 0.5 cycle
0 % during 1 cycle |
| 40 % during 10 cycles |
| 70 % during 25 cycles |
| 0 % during 250 cycles |
