Intelligent Digital Manual Call Point
Product Introduction:
J-SAP-TCSB5406 W Wireless Digital Manual Call Point (hereinafter
referred to as the alarm button ) is suitable for installation in
public places, factories and other environments. When a fire is
manually confirmed, press the button on the alarm button, and the
red light of the alarm button is always on. to the wireless
communication technology transmits an alarm signal to the control
panel, the control panel when the response should the alarm signal
the alarm button enters a wait control panel reset state, an alarm
button while the control panel displays the encoded information and
an alarm sounds.
Main Characteristics:
1.Battery Type: CR17450 3.0 V / 2400mAh Voltage range: 2 .7 ~ 3.3V
2.Operating Current: Monitor current ≤ 10 uA alarm current ≤ .19 m
A
3. Indicator:
Fire light: red, not network when logging every 48s flash time,
alarm always lightens
Fault light: yellow , flashes twice every 48s when the battery is
under power, and periodically flashes when the communication fails
after being connected to the network
Working light: green , flashing periodically when the communication
is normal after entering the network
4 . Encoding: automatically allocated when the network control
panel
5 . Communication: 470MHz FSK encoded two-way communication
6 . Communication distance: ≤50m
7. Transmitting power: <20dBm
8 . Reset: special key reset
9. Form of starting parts: reusable type
10 . Use of the environment:
Type: Indoor atmospheric pressure: 86kPa～106kPa
Temperature: -10℃～+55℃ Relative humidity ≤95%, non-condensing
11 . Dimensions: 95 m m × 96 m m × 50 m m
12 . Shell materials and colors: the ABS , red color
13 . Weight: about . 19 0 G (with battery)
14 . Implementation of the standards:
GB 19880-2005 "manual fire alarm button "
XF 1151-2014 " General Requirements for Wireless Communication
Function of Fire Alarm System "
Features:
1 using the pressing structure design, alarm button press need to
use special tools to reset ;
2 Adopting 470MHz wireless communication technology , without
pre-buried wiring, convenient and quick engineering installation;
3 With battery low voltage detection function , it can reflect the
battery power situation in time;
4 The use of microprocessor to realize signal processing and
digital signal to communicate with the control panel, the work is
stable and reliable, and has a good ability to suppress
electromagnetic interference.
Fault and Abnormal information processing and Regular Check:
| Failure phenomenon | reason | Solution |
| The control panel has no status prompt after the device alarms | The device is not connected to the network | Restart the network operation |
| Device networking is unsuccessful | Too far away from the control panel or interference sources nearby | Move the device near the control panel, reconnect to the network
and remove the source of interference |
| The device's red light is off | Low battery or no battery inserted | Replacement battery |
Others:
Please refer to the product manual for details
Company Profile:
Henan Weiguo Intelligent Technology Co., LTD., founded in 2015, is
an important subsidiary of Hanwei Electronics Group Corporation
(Stock no.:300007) in the field of intelligent healthy, safe home
and IoT business. Henan Weiguo Intelligent Technology Co., LTD.,
relying on the core sensor technology, focuses on gas and smoke
alarm, air quality monitor, alcohol tester and firefighting
products. Based on introduction of featured technology from both
Hanwei Electronics Group Corporation and abroad, Henan Weiguo
intelligent Technology Co., LTD., has developed into an innovative
company with the collection of design, R&D development,
production, sales and service. We will always be committed to
becoming the leader in intelligent hardware, providing safe,
healthy, environmentally friendly and intelligent working and
living environment for families and users all over the world.
FAQ
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after
payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the device according to your request.
