Wireless Addressable Photoelectric Smoke Alarm Detector for School/
Hotel/Skyscraper Safety
Product Introduction:
JTY-GM-TC5401W Wireless Addressable Photoelectric Smoke Detector
(hereinafter referred to as the detector) is an intelligent
industrial fire detector made according to the principle of
high-precision infrared pair tube emission and reception, which can
be controlled with our company’s wireless fire alarm control
panel/wireless fire protection linkage control panel (hereinafter
referred to as the control panel) and the smart home platform APP
(hereinafter referred to as the APP) are used together. The
detector uses 470MHz wireless transceiver technology, with a highly
integrated micro-processing chip to process data. It has the
characteristics of high sensitivity, long transmission distance,
and low power consumption. It can accurately and quickly detect
changes in smoke concentration in the environment, accurately and
timely confirm the fire and call the police.
This product has beautiful appearance design, simple and convenient
installation. It is suitable for places where a large amount of
smoke is generated when a fire occurs, while there is no smoke,
dust and steam retention under normal circumstances. This product
is widely used in all kinds of residential buildings, which can
detect fire early and protect people's lives and property to the
utmost extent.
Main Characteristics
1.Using advanced wireless communication technology, signal
transmission can be completed without wiring, and the engineering
installation is simple and convenient;
2.Using 470MHz frequency band communication, FSK coding technology,
strong anti-interference ability, long transmission distance;
3.With battery low-voltage detection function, remind users to
replace when the battery is insufficient to maintain the detector's
normal operation.
4.With dust accumulation alarm function.
Main technical specifications
1. Battery model: CR17450 3V
2. Working Current: Standby Current≤8uA; Alarm Current≤18mA
3. Indicators: Fire Indicator: red, flashing once every 48s during
inspection, and always on when alarming
Fault Indicator: yellow, flashes twice every 48s when the battery
is under power, and periodically flashes when the communication
fails after being connected to the network
Working Indicator: Green, flashing periodically when the
communication is normal after entering the network
4. Coding method: automatically assigned by the controller during
networking
5. Communication method: 470MHz FSK coded two-way communication
6. Communication distance: ≤50m
7. Transmitting power: <20dBm
8. Frequency band: 470MHz
9. Protection area: When the height of the space is less than 8m,
the protection area of a detector is 20～30㎡ for the general
protection site.
The specific parameters should be based on the "Code for Design of
Automatic Fire Alarm System" (GB 50116-2013).
10. Use environment: Atmospheric pressure: 86kPa～106kPa
Temperature: -10℃～+55℃
Relative humidity: ≤95%, no condensation
11. Dimensions: diameter 100mm high 55mm (including base)
12. Shell protection grade: IP30
13. Shell material and color: ABS, off-white
14. Weight: about 118g (including battery)
15. Installation hole distance: 60mm
16 .Executive standard: GB 4715-2005 "Point Type Smoke Fire
Detector"
Fault and Abnormal information processing and Regular Check
| Fault | Reason | Solution |
| No status prompt on the control panel after device alarms | The device is not connected to the network | Restart the network operation |
| Device networking is unsuccessful | Too far away from the control panel or interference sources nearby | Move the device near the controller, reconnect to the network and
remove the source of interference |
| Red light is off | Low battery or no battery inserted | Replace battery |
Company Profile
Henan Weiguo Intelligent Technology Co., LTD., founded in 2015, is
an important subsidiary of Hanwei Electronics Group Corporation
(Stock no.:300007) in the field of intelligent healthy, safe home
and IoT business. Henan Weiguo Intelligent Technology Co., LTD.,
relying on the core sensor technology, focuses on gas and smoke
alarm, air quality monitor, alcohol tester and firefighting
products. Based on introduction of featured technology from both
Hanwei Electronics Group Corporation and abroad, Henan Weiguo
intelligent Technology Co., LTD., has developed into an innovative
company with the collection of design, R&D development,
production, sales and service. We will always be committed to
becoming the leader in intelligent hardware, providing safe,
healthy, environmentally friendly and intelligent working and
living environment for families and users all over the world.
FAQ
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after
payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the device according to your request.
