wireless addressable heat detector home fire detector
high-precision thermistor sensor
Product Introduction:
JTW-ZOM-TC5402W wireless addressable heat detector (hereinafter
referred to as the detector) is a smart home fire detector that
uses a high-precision thermistor as the sensor. It can be used with
the company’s wireless fire alarm control panel /wireless fire
linkage control panel (hereinafter referred to as the device) for
supporting use. The detector utilizes advanced wireless transceiver
technology and a highly integrated micro-processing chip to process
data. It has the characteristics of high sensitivity, long
transmission distance, and low power consumption. It can accurately
and quickly detect changes in ambient temperature, determine fire
and call the police.
This product has beautiful appearance design, convenient and
reliable installation, and is suitable for places where smokeless
fires may occur, a large amount of dust or smoke and steam are
trapped under normal circumstances. This product is widely used in
various residential buildings. The fire can be detected as early as
possible, and the people's lives and property can be protected to
the greatest extent.
Features
1. Using advanced wireless transceiver technology, signal
transmission can be completed without wiring, and the project is
simple and convenient.
2. Using 470MHz frequency band communication, FSK coding
technology, strong anti-interference ability, long transmission
distance;
3. With battery low-voltage detection, remind users to replace when
the battery is insufficient to maintain the detector's normal
operation.
4. The use of high-sensitivity thermal elements improves the
response speed of the temperature detector to temperature changes.
Main technical specifications
1. Type:A2R
2. Battery type: CR17450 3V
3. Working Current: Standby Current≤3uA
Alarm Current≤18mA
4. Indicators:Fire Indicator:red, always on when it alarms
Fault Indicator:yellow,flash twice every 48s when the battery is
undervoltage. Periodic flashing when communication fails after
entering the network
5.Working Indicator:Green, flashing periodically when the
communication is normal after entering the network Coding method:The control panel is automatically assigned during
networking
6.Communication method:470MHz FSKCoded two-way communication
7.Communication distance:≤50m
8.Transmitting power: <20dBm
9. Frequency band:470MHz
10.Atmosphere pressure:86kPa～106kPa
11.Temperature:-10℃～+50℃
Relative humidity≤95%,non-condensing
12. Dimensions: diameter 100mm, high 54mm (with base)
13. Protection grade: IP30
14. Material and color: ABS, off-white
15. Weight: about 110g (including battery)
16. Installation hole distance: 60mm
17. Executive standard: GB 4716-2005 "Point Type Temperature
Sensing Fire Detector"
XF 1151-2014 "General Requirements for Wireless Communication
Function of Fire Alarm System"
Fault and Abnormal information processing and Regular Check
| Fault | Reason | Solution |
| No status prompt on the control panel after device alarms | The device is not connected to the network | Restart the network operation |
| Device networking is unsuccessful | Too far away from the control panel or interference sources nearby | Move the device near the controller, reconnect to the network and
remove the source of interference |
| Red light is off | Low battery or no battery inserted | Replace battery |
Photos
Company Profile
Henan Weiguo Intelligent Technology Co., LTD., founded in 2015, is
an important subsidiary of Hanwei Electronics Group Corporation
(Stock no.:300007) in the field of intelligent healthy, safe home
and IoT business. Henan Weiguo Intelligent Technology Co., LTD.,
relying on the core sensor technology, focuses on gas and smoke
alarm, air quality monitor, alcohol tester and firefighting
products. Based on introduction of featured technology from both
Hanwei Electronics Group Corporation and abroad, Henan Weiguo
intelligent Technology Co., LTD., has developed into an innovative
company with the collection of design, R&D development,
production, sales and service. We will always be committed to
becoming the leader in intelligent hardware, providing safe,
healthy, environmentally friendly and intelligent working and
living environment for families and users all over the world.
FAQ
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after
payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the device according to your request.
