Smart Sounder of Wireless fire gas detection system for home school
hospital hotel mall Public Security
Product Introduction:
The TCSG5416W wireless sounder (hereinafter referred to as sounder)
is suitable for installation in public places, factories and other
environments, and is used in conjunction with the JB-TB-TC5126W
wireless sounder control panel (hereinafter referred to as the
panel). When the panel receives the sounder command from other fire
alarm equipment, the panel activates the siren through wireless
signals, and the siren emits sound and light signals to achieve the
purpose of sounder.
Features:
2.1. Adopting 470MHz wireless communication technology, no need to
pre-buried wiring, easy and quick engineering installation;
2.2. With battery undervoltage detection function, it can remind
users to replace the battery in time;
2.3. Use microprocessor to realize signal processing, and use
digital signal to communicate with control panel, work stably and
reliably, and have good suppression ability against electromagnetic
interference.
Technical specifications:
1. Battery model: CR17450-2-080-02
2. Rated working voltage: DC3V
3. Working current: monitoring current ≤45uA alarm current ≤240mA
4. Indicator light:
Fault light: yellow, flashing periodically when communication fails
Working light: green, flashing periodically when communication is
normal
5. Sound pressure level: 75dB ~ 115dB (A weighting)
6. Modulation cycle: 3.0S～4.0S
7. Flash frequency: 1Hz～1.5Hz
8. Coding method: automatically assigned by the control panel
during networking
9. Communication method: 470MHz FSK coded two-way communication
10. Communication distance: ≤50m
11. Transmitting power: <20dBm
12. Reset method: control panel reset
13. Use environment:
Type: Indoor atmospheric pressure: 86kPa～106kPa
Temperature: 0℃～+55℃ Relative humidity ≤95%, non-condensing
14. Dimensions: 95mm×127mm×56mm
15. Shell material and color: ABS, red
16. Executive standard:
GB 26851-2011 "Fire Sound and/or Light Alarm"
XF 1151-2014 "General Requirements for Wireless Communication
Functions of Fire Alarm system
Fault and Abnormal information processing and Regular Check
| Fault | Reason | Solution |
According to the sensitivity level of the control panel, the yellow
fault light will flash once periodically (75 seconds at level 1 Level 2 40 minutes Level 3 2 and a half hours Level 4 5 hours) | Too far away from the control panel or interference sources nearby
cause communication failure | Move the device near the control panel, reconnect to the network
and remove the source of interference |
| The faulty yellow light flashes 2 times periodically (every 48
seconds is a cycle) | Report a low battery fault | Replacement battery |
| After the device alarms, the control panel has no status prompt | The device is not connected to the network | Restart the network operation |
| Device networking is unsuccessful | Too far away from the control panel or interference sources nearby | Move the device near the control panel, reconnect to the network
and remove the source of interference |
Others
Company Profile
Henan Weiguo Intelligent Technology Co., LTD., founded in 2015, is
an important subsidiary of Hanwei Electronics Group Corporation
(Stock no.:300007) in the field of intelligent healthy, safe home
and IoT business. Henan Weiguo Intelligent Technology Co., LTD.,
relying on the core sensor technology, focuses on gas and smoke
alarm, air quality monitor, alcohol tester and firefighting
products. Based on introduction of featured technology from both
Hanwei Electronics Group Corporation and abroad, Henan Weiguo
intelligent Technology Co., LTD., has developed into an innovative
company with the collection of design, R&D development,
production, sales and service. We will always be committed to
becoming the leader in intelligent hardware, providing safe,
healthy, environmentally friendly and intelligent working and
living environment for families and users all over the world.
FAQ
Q1: Are you manufacturer?
A: (yes)
Q2: What is the lead time?
A: usually
Fire control: one week working day
bulk quality: three weeks working days
Emergency lights: two weeks working days
bulk quality: four weeks
Q3: How do you ship the goods and how long does it take arrive?
A: We usually ship by DHL, UPS, FedEx or by Air. 3-5 days after
payment received.
Q4: Can I have a sample order?
A:Yes,we welcome sample order to test and check quality.
Q5: Do you offer OEM service?
A: Yes, we can design the device according to your request.
